Product Center

Focusing on high-quality explosion-proof tool solutions

Category

Jigs

T87204A Dipped Pliers,Round 45 Degree Bent

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. Similar to needle-nose pliers without cutting edges, it is suitable for working in narrow or sunken operating spaces.

T87204 Injection Pliers,Round 45 Degree Bent

T87203A Dipped Pliers,Diagonal Cutting

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. Diagonal pliers are mainly used to cut wires, redundant leads of components, and are often used to replace ordinary scissors to cut insulating sleeves, nylon cable clamps, etc.

T87203 lnjection Pliers,Diagonal Cutting

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. Diagonal pliers are mainly used to cut wires, redundant leads of components, and are often used to replace ordinary scissors to cut insulating sleeves, nylon cable clamps, etc.

T87202A Dipped Pliers,Snipe Nose

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. Use It is mainly used to cut single-strand and multi-strand wires with thinner diameters, as well as to bend single-strand wire joints, peel off plastic insulation layers, etc. It can only be operated in a narrow working space without a cutting edge. For pinching work, those with cutting edges can cut small parts. It is one of the commonly used tools for electricians, especially for assembly and repair of internal equipment.

T87202 Injection Pliers,Snipe Nose

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. Use It is mainly used to cut single-strand and multi-strand wires with thinner diameters, as well as to bend single-strand wire joints, peel off plastic insulation layers, etc. It can only be operated in a narrow working space without a cutting edge. For pinching work, those with cutting edges can cut small parts. It is one of the commonly used tools for electricians, especially for assembly and repair of internal equipment.

T87201A Dipped Pliers,Lineman

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. Mainly used for clamping or bending sheets, cutting wires or wires.

T87201 Injection Pliers,Lineman

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. Mainly used for clamping or bending sheets, cutting wires or wires.

< 1 2 >

Dedicated to the production of explosion-proof tools, steel tools, non magnetic tools, titanium alloy tools, stainless steel tools, and insulation tools