Products-TIANJIN QIAOFANG SAFETY TOOLS CO., LTD.

【Application】For tightening and loosening nuts 【Manufacturing process】Die forging products 【Material】Titanium alloy 【Material introduction】 1. Titanium alloy tools are non-magnetic and will not be magnetized in a strong magnetic field. It will not deform at °C, and it can still maintain good toughness at low temperature -250 °C. The corrosion resistance of the tool is higher than that of stainless steel. Pollution-free and radiation-free, it is the most advanced and only environment-friendly tool in the world. Light weight, good strength, no rust, non-toxic, strong impact resistance. It is an ideal random tool for aviation, vehicle tool for military industry, ship tool for sailing, and also an ideal tool for mechanical maintenance.

T85101 STitanium Wrench, Adjustable

【Application】For tightening and loosening nuts 【Manufacturing process】Die forging products 【Material】Titanium alloy 【Material introduction】 1. Titanium alloy tools are non-magnetic and will not be magnetized in a strong magnetic field. It will not deform at °C, and it can still maintain good toughness at low temperature -250 °C. The corrosion resistance of the tool is higher than that of stainless steel. Pollution-free and radiation-free are advanced environmental protection tools in the world. Light weight, good strength, no rust, non-toxic, strong impact resistance. It is an ideal random tool for aviation, vehicle tool for military industry, ship tool for sailing, and also an ideal tool for mechanical maintenance.

T89203 Draggle Tape of Tank Lorry

【Application】It is used for vehicles transporting dangerous chemicals. The length of the product can be freely adjusted to keep the low end in effective contact with the ground, which can prevent fire and explosion accidents caused by static electricity. 【Material】Rubber 【Material Introduction】 1. High elasticity: elastic modulus Low, large elongation deformation, recoverable deformation, and can maintain elasticity in a wide temperature range (-50~150°C). Viscoelasticity: The rubber material is affected by temperature and time when it deforms and recovers, and shows obvious stress relaxation and creep phenomena. Under the action of vibration and alternating stress, hysteresis loss occurs. Electrical insulation: Just like metal corrosion, wood decay, and rock weathering, rubber will also age due to changes in environmental conditions, deteriorating performance and reducing service life.

T89202 Static Flange Connector

【Application】Used at both ends of the flange, the connection of each stage of the bridge, the disconnection between the wire tubes, photovoltaic panels, and electrical auxiliary connections to conduct potentials. 【Manufacturing process】Die forging products 【Material】Copper 【 Material introduction】 1. Pure copper is a soft metal. The surface is reddish orange with metallic luster when it is just cut, and the single substance is purple red. Good ductility, high thermal conductivity and electrical conductivity, so it is the most commonly used material in cables and electrical and electronic components. It can also be used as a building material and can form many kinds of alloys.

T89201 FlangeElectrostatic jumper

【Application】Used at both ends of the flange, the connection of each stage of the bridge, the disconnection between the wire tubes, photovoltaic panels, and electrical auxiliary connections to conduct potentials. 【Manufacturing process】Die forging products 【Material】Copper 【 Material introduction】 1. Pure copper is a soft metal. The surface is reddish orange with metallic luster when it is just cut, and the single substance is purple red. Good ductility, high thermal conductivity and electrical conductivity, so it is the most commonly used material in cables and electrical and electronic components. It can also be used as a building material and can form many kinds of alloys.

T87606 Insulation Test Pen

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. Check whether it is charged, check whether the line is on or off, judge the fire, zero and ground wires, and find the breakpoint of the line

T87605 Insulation tape

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. The insulating tape has the characteristics of fire prevention and flame retardant. Wrap the insulating tape on the circuit joint. When the circuit energized joint heats up, the insulating tape will not melt, which can prevent leakage.

T87604 Insulated Cable Knife(Straight)

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. The wire stripping knife is mainly used for wire stripping when the network wiring is connected to the terminal and when the joint is made.

T87602 Dipped Precision Tweezers

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. Tweezers are a tool used to pick up bulk medicines, metal particles, hair, thorns and other tiny things.

T87601 Dipped Hacksaw

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes. 5. The saw bow is a tool used to install and tension the saw blade, which can be divided into two types: fixed type and adjustable type.

T87507 11-piece combination set of insulating and voltage-resistant sleeves

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes.

T87506 Insulation injection molding 11-piece combination tool set

【Material】 Network vanadium steel 【Material introduction】 The element symbol Cr-V is an alloy tool steel added with chrome-vanadium alloy elements. After heat treatment, the hardness is above 60HRC (Rockwell hardness), and it has good resistance under specific working conditions. Abrasiveness 1. It is forged with vanadium steel, thick and durable. The overall heat treatment of the product has uniform hardness. The surface is treated with hard film and anti-rust treatment, which meets many standards such as German DIN7444. Non-standard special-shaped heavy-duty specification products can be customized for customer processing. 2. Chromium vanadium steel is mainly structural steel, commonly used are 20CrV, 40GrV, 45CrV. The role of vanadium in steel is strong carbide, and the grain is refined, but the hardenability is poor. Therefore, vanadium is added to chromium steel to improve both strength and toughness. 3. The handle passed the flame retardancy test. The handle passed the 500N pull-out force test and passed the 10000V extreme insulation withstand voltage test. The handle passed the impact resistance test. Hardness) above. Manganese steel refers specifically to wear-resistant steel ZGMn13, which has good wear resistance under specific working conditions, such as tank track shoes.

Product Center

Focusing on high-quality explosion-proof tool solutions